KKK-A-1822 E
3.15
ADDITIONAL SYSTEMS, EQUIPMENT, ACCESSORIES, AND SUPPLIES.
3.15.1 ADDITIONAL AND OPTIONAL EQUIPMENT.
When specified (see 6.2-ss), additional or optional system(s), equipment, accessories, and supplies
shall be furnished, in addition to the standard ambulance component systems and devices specified
herein. These items shall be selected by the purchasers. Optional items may be further described
in authoritative procurement documents. In no event shall the specified or furnished optional
item(s) reduce the quality and intent of the ambulance but shall enhance its design and purpose.
The materials, devices, items, and fabrication, if not specifically described, shall be not less in
quality, strength, performance, and service than those normally provided by the most reputable
manufacturers.
3.15.2 STANDARD MANDATORY MISCELLANEOUS EQUIPMENT.
Unless otherwise precluded in the contract, each ambulance shall be equipped with, but
not limited to the following:
a.
Fire extinguishers: Two, ABC dry chemical, carbon dioxide) minimum 2.3 kg (5 lb.) unit,
in a quick-release bracket, one mounted in the driver/cab compartment or in the body
reachable from outside the vehicle and one in the patient compartment. When located in
either the driver or patient compartments, the mounting bracket shall be a stable design.
b.
"No Smoking Oxygen Equipped" and "Fasten Seat Belts" signs: Conspicuously placed in
the cab and patient compartment.
c.
Overhead grabrail, minimum 152 cm (60 in.) long, maximum 10.2 cm (4 in.) depth,
on the ceiling over the primary patient. Grabrail shall be stainless steel, aluminum, or
other corrosion resistant material, and have padded or curved up ends, and rounded
corners. Mounting brackets shall be chromed, stainless steel, polished cast aluminum
or other corrosion resistant materials. The grabrail(s) shall be installed in a manner
that precludes loosening and shall meet a 136 kg (300 lb.) pull test in all three axis.
The grabrail shall be tested in accordance with AMD Std. 008.
d.
Backup alert alarm, (audible warning device) activated when the vehicle is shifted into
reverse. Device must meet OSHA and SAE J994 requirements, and shall be rated (SAE)
for Type C or B (97 or 107 dba at 122 cm (4 feet)) or purchaser may specify (see 6.2-ss)
alarms that automatically adjust to ambient noise levels.
62
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business