MIL-B-45367AA
(s)
Transmission lockup, if required for bus with fixed ratio type automatic
transmission (see 3.4.5.1)
(t)
Manual transmission, if required (see 3.4.5.2).
(u) Traction control, if required (see 3.4.9.1).
(v) Two-speed axle, if required (see 3.4.9.2).
*
(w) Low profile tires, if required (see 3.4.10.1).
(x) Bias ply tires, if required (see 3.4.10.1).
(y) Carrier and spare wheel or rim assembly, if required (see 3.4.10.4).
(z)
Carrier, spare wheel and tire assembly, if required (see 3.4.10.5).
(aa) Air operated horn, if required (see 3.4.12).
(ab) Tools, if required (see 3.4.16).
(ac) Right-hand drive, if required (see 3.4.17).
(ad) Rear step/seat, if required (see 3.5.3.4).
(ae) Rear loading ramp, if required (see 3.5.3.5).
(af) Destination sign compartment, if required (see 3.5.4.4).
(ag) Sign roll with destination, if required (see 3.5.4.4).
(ah) Service door padlocking hasp and emergency door locking bolt, if required
(see 3.5.5).
(ai) Air actuated doors, if required (see 3.5.5.1).
(aj) Auxiliary heater, if required (see 3.5.10.1.1).
(ak) If air conditioning is not required (see 3.5.11).
*
(al) Evaporative air conditioning, if required (see 3.5.11.2).
*
(am) Vehicle engine powered air conditioning, if required (see 3.5.11.3).
*
(an) Remote control outside rearview mirror, if required (see 3.5.12.1).
(ao) Additional litter capacity for type III vehicles, if required (see 1.2 and 3.5.13.4).
(ap) Seat belts, if required (see 3.5.15).
(aq) Road test mileage, if different (see 4.3.4.1)
6.3 Performance prediction. Completed copies of SAE Truck Ability Predition
Procedure form and computation for low speed requirement for each vehicle model furnished
under contract should be submitted as specified in the contract. Unless other conditions are cited
in this contract, computations should be made for normal atmospheric pressure, normal ambient
air temperature, and still, dry air. The factors to be used in predicting vehicle ability (see 3.3.1.1)
are established as follows for the corresponding SAE J688, Truck Ability Prediction Procedure
Tables:
Table 1
- Tire Factor. This factor must relate to the size of tires
furnished by the contractor in accordance with this
specification.
Table 2
- Altitude Factor. 1.00.
Table 3
- Rolling Factor. 1.841.
Table 4
- Area Factor. 0.197.
Table 5
- Velocity Factor. 333.
Table 6
- Altitude Factor. 1.00.
41
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business