MIL-B-45367AA
*
(Application for copies of Tire and Rim Association publications should be addressed to
the Tire and Rim Association, Inc., 175 Montrose West Ave., Copley, OH 44321.)
(Non-Government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be available
in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this specification
and the references cited herein the text of this specification shall take precedence. Nothing in
this specification, however, shall supersede applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Standard vehicle and accessories. Except as specified in 3.1.1.1 through 3.1.1.9, the
vehicle, components, assemblies, and accessories to be delivered under the contract shall be
standard or optional items, which meet or exceed the requirements of this specification. Except
as specified in 3.1.1 through 3.1.1.9, no removal, substitution or alteration of the chassis
manufacturer's standard or optional chassis model components shall be made. All chassis items
shall be as represented in the bus builder's and chassis manufacturer's technical data. Special
bodies or mounted equipment shall be as represented in the body and equipment manufacturer's
technical data. Technical data shall be limited to specifications and technical material identical
to that furnished to the authorized company representatives for selection of vehicle models and
components, and shall be available to the engineering offices of the procuring activity, prior to
delivery of the items. The chassis model furnished shall be not older than the chassis
manufacturer's current model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified
in 3.1, the vehicle shall be furnished with special equipment as specified herein.
*
3.1.1.1 Painting and marking. Treatment, painting, identification marking and data
plates shall be in accordance with MIL-STD-1223. The exterior color and identification
markings shall be in accordance with the requirements of MIL-STD-1223 for the military service
identified by the procuring activity (see 6.2). When specified (see 6.2), the exterior color shall
be National School Bus Yellow. When specified (see 6.2), concealed markings shall be
furnished.
3.1.1.2 Rustproofing. When specified (see 6.2), the vehicle chassis and underbody,
including fenders, skirts, and wheelwells, shall be rustproofed in accordance with
FED-STD-297.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business