KKK-A-1822 E
dd.
Patient compartment height. Minimum height of 152 cm (60") required, specify additional
requirements (see 3.10.4).
ee.
Body construction. Aluminum is standard for modular ambulances. Specify if
other materials are required or permitted (see 3.10.5 and 3.10.6).
ff.
Dual hinged doors are standard on Type II. Specify if sliding door is required (see
3.10.8). Specify if other door opening widths/configurations are required for specific
applications.
gg.
Windows. Specify if other than standard, tinted, or when opening windows are
required or permitted (see 3.10.14).
hh.
Walkthru on Type II & III is standard. Specify if walkthru deletion is required (see
3.10.15 thru 3.10.15.2). When walkthru is deleted, a pass thru window shall be
furnished and additional compartments above and below the window can be furnished
as specified by the purchaser.
ii.
Interior and exterior storage accommodations. Specify any specific additional
requirements (see 3.11.1 to 3.11.4).
jj.
Stretchers, cots, and litters. Specify specific cot fastening device, item(s) required,
and any upgrading features preferred (see 3.10.1, 3.11.5 to 3.11.7, and 3.15.4 M10,
M16, M21). Cots are optional and not standard with vehicle. Cot fastener is
standard. Specify specific model.
kk.
Oxygen system (on board). Specify if other than "M" size bottle and other than
manufacturer's standard location (see 3.12.1).
ll.
Oxygen. Quick disconnect fitting for action wall and specified accessories. Specify
type (see 3.12.1)
mm.
Portable oxygen unit. Specify location of portable oxygen unit and spare bottle if
other than location in 3.12.2.
nn.
Suction aspirator system, electrically powered type, is standard. Gasoline powered
vehicles may use engine vacuum systems (see 3.12.3 to 3.12.4).
oo.
Air conditioning. Auxiliary Condenser. Specify if auxiliary condenser is required
(see 3.13.5.1).
pp.
Patient compartment sound level criteria. Specify if more stringent patient
compartment sound level limits are required (see 3.13.8).
qq.
Communication equipment. Two-way radio, telemetry modulator (local purchase
of radio equipment and installations is recommended). Specify if contractor is to
furnish and install the radio(s), and cite brand(s) acceptable, power output,
frequencies needed, etc. Give complete details and provide a coordinator name,
address, and telephone number (see 3.14 to 3.14.4). One antenna lead is standard.
Specify additional antenna leads and locations. Specify location(s) of portable radio
battery charging circuit leads (see 3.7.7.1, and 3.7.7.2).
rr.
Siren. Specify if foot switch, or other siren upgrading features are required (see
3.14.6).
81
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business