KKK-A-1822 E
s.
12 Volt DC power. Specify if other than standard 12 volt DC outlets, military type
connector, or higher current capacity is required to power medical equipment, etc.
(see 3.7.7.3).
t.
Patient compartment controls. Specify if other than standard EMT panel/controls,
instruments, etc. are required (see 3.7.10).
u.
Electromagnetic Radiation Type Certification by equipment and ambulance
manufacturers is standard. Specify if entire vehicle shall be tested. (see 3.7.12).
v.
Warning lights. Red, clear, and amber lights are standard. Specify other color(s) only if
required by State or local regulations. Specify strobe, LED, HID, or quartz halogen.
Specify if other automatic switching arrangements are required (see 3.8 through 3.8.2.5).
Specify if automatic primary to secondary mode and automatic day/night switching
arrangements are required. Standard system includes manual "Primary" and "Secondary"
mode switch and, on strobe systems, a day/night dimming switch (see 3.8.2.3). Specify if
a second rear amber is required.
NOTE:
ADDITIONAL WARNING LIGHTS/ SYSTEMS ARE NOT NECESSARY
AND SHOULD NOT BE SPECIFIED IN ORDER TO AVOID
OVERLOADING THE ELECTRICAL SYSTEM, AND REDUCING
USABLE PAYLOAD.
w.
Flood and Loading Lights. Specify if two flood lights per side and two patient loading
lights on the rear are required. (See 3.8.3)
x.
Seats. Specify if bench type seat is desired or permitted on Type I vehicles. Specify
if high back bucket type seats are required and specify if other than vinyl type upholstery
is desired or acceptable (see 3.9.3).
y.
Mirrors. Specify if other than standard mirrors are required, e.g. West Coast, integral
convex, heated mirrors, etc. (see 3.9.5).
z.
Bumpers and steps. On Class 2 vehicles, specify if other than standard step height is
necessary for increased departure angles, e.g. severe off road use, air transportability
(see 3.9.6).
aa.
Fenders. Required per specification. Specify type (see 3.9.7.1).
bb.
EMT Seating. Specify other than standard requirements. Specify if integral EMT/
child safety seat is required (see 3.10.3).
cc.
Patient compartment length. 310 cm (122") is minimum required. Specify additional
requirements (see 3.10.4).
NOTE:
COMPARTMENT LENGTHS LESS THAN 310 cm (122") COULD
RESULT IN REAR DOOR INTERFERENCE WITH TRACTION SPLINTS
ON TALL PATIENTS.
80
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business