·
Four Extra Circuits - pre-run from the engine compartment to console base. One
circuit is heavy gauge for additional battery or ground connection.
· Four Extra Circuits - pre-run from the console base to trunk.
c. Alternating Headlight Flasher - control wire accessible at console for optional connection
to customer supplied positive control switch box. Extra relay available for optional
override of alternating headlight flasher at night when headlights are in use.
3.2.2 HEAVY-DUTY COMPONENT TAXI PACKAGE
When code H8 is specified, the vehicle shall be furnished with OEM's heaviest duty components
available for the model offered, as provided by the manufacturer commercially for taxi vehicles,
consisting of at least the following:
a. Chassis and Components: cooling system, radiator and coolant recovery, fan
blades, battery, alternator, starter, transmission and oil cooler, and engine mounts;
b. Suspension: springs, shock absorbers, and stabilizer bar(s);
c. Bucket front seats;
d. Accessories: dome light, front and rear door switch operated; arm rests and
ashtray front and rear; mirrors right and left sides, etc; and
e. Unless otherwise specified, roof wiring and holes shall not be furnished.
3.2.3 AIR POLLUTION CONTROL
The vehicles destined for all states, the District of Columbia, Puerto Rico, the Virgin Islands,
Guam, and American Samoa shall comply with U.S. Environmental Protection Agency
Regulations governing Control of Air Pollution from New Motor Vehicles and New Motor Vehicle
Engines in effect on the date of manufacture and with state requirements for which the vehicles
are destined.
3.2.4 BRAKE SYSTEM
All service brakes shall be of the self-adjusting, power assisted type. An antilock, four-wheel
brake system shall be furnished.
3.3 DRIVETRAIN
3.3.1 ENGINE
Unless otherwise specified, the supplier shall furnish the vehicle with an engine that meets or
exceeds the requirements specified. The engine furnished shall not exceed the number of
cylinders specified. When specified that the vehicle will be exported, the manufacturer shall
furnish an engine suitable for use at the ultimate destination. When code E2 is specified, a six
cylinder engine shall be furnished. When code E3 is specified, an eight cylinder engine shall be
furnished. When code VDD is specified, the engine shall selectively deactivate cylinders in order
to improve fuel economy.
3.3.2 ENGINE COMPONENTS AND SYSTEMS
When specified, the vehicle(s) shall be furnished as indicated: code E85, ethanol and gasoline
compatible vehicle; and code OLS, oil life system designed to maximize drain intervals.
3.3.3 DRIVING AXLE
When code D3 is specified, the vehicle shall be furnished with a positive traction, limited slip, or
automatic locking differential. When code ATC is specified, the OEM automatic traction control
system shall be furnished. When code AWD is specified, the OEM full time all wheel drive
system shall be furnished.
3.4 SUSPENSION
3.4.1 SUSPENSION AND STEERING
When the handling and performance package, code H3, is specified, OEM's components and
equipment, offered commercially and engineered for ride and handling performance, shall be
Federal Standard 122AX
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business