When code PSME is specified, the publications shall be electronic (CD or web-based).
3.7 STANDARD AND ADDITIONAL REQUIREMENTS
3.7.1 OCCUPANT PROTECTION
When code SIAB is specified, side-impact air bags shall be furnished. These are inflatable
devices designed to protect the head or chest (torso) of adult passengers. Protection is provided
for front seat passengers and may provide for rear seat passenger protection. Head type bags
typically deploy from the roof rail above the side windows. Chest type bags are mounted in the
side of the seat or in the door.
When code HCAB is specified, head and chest side-impact air bags shall be furnished. These
"combination" type air bags are inflatable devices designed to protect the head and chest (torso)
of front seat, adult passengers. HCABs typically deploy from the side of the seat or any
combination of roof rail, seat, or door mounting locations. This option may require an upgrade of
the OEM's base package vehicle offerings.
3.7.2 EXPORT VEHICLES
Export vehicle(s) shall conform to applicable safety standards of U.S.A. Shipping instructions
shall be in accordance with the contract.
3.7.3 SPEEDOMETER/ODOMETER
Unless otherwise specified, the speedometer shall indicate speeds in both miles and kilometers,
and the odometer shall show cumulative distance in miles. When code SK is specified, the
odometer shall show cumulative distance in kilometers.
3.7.4 PREDELIVERY INSPECTION AND SERVICING
Prior to the acceptance of the vehicle(s), the contractor, at his plant or at an authorized dealership
of the same make, shall perform final predelivery inspection. This inspection shall include the
predelivery servicing, lubricating, adjustments, appearance cleaning, and make-ready to use and
operate the vehicle and the furnished contracted equipment. The predelivery servicing shall be
performed in accordance with the vehicle manufacturer's prescribed procedures. Servicing shall
comply with the ambient temperatures and conditions applicable with the route of transport and
the consignee's ultimate destination and area of operation. Dealer shall not affix any dealer
identification items such as decals, plates, logos, or other advertising material to the vehicle.
3.7.4.1 CODE "CNS" CONSIGNEE DELIVERY
When consignee (direct) delivery, code CNS, is specified, the contractor shall deliver the vehicle
to the consignee delivery address designated on the motor vehicle delivery order. The consignee
is responsible for:
a. The predelivery inspection and servicing normally provided by the dealer during the
standard dealer delivery process.
b. Notifying the contractor of the delayed delivery date and the in-transit mileage
accumulation, if applicable.
c. Notifying the contractor of any damages or shortages found within 24 hours.
d. Obtaining local safety and emission testing.
Items normally installed by the dealer as part of the predelivery servicing shall be shipped in the
vehicle. The consignee will be responsible for installing these items. The vehicle must be
accepted wheels on ground.
3.7.4.2 DEALER DELIVERY
Unless otherwise specified, dealer delivery is required. The contractor shall have the final
predelivery inspection and servicing performed at an authorized dealer of the same make nearest
to the destination. Following predelivery servicing, the dealer shall notify the person/office
designated on the motor vehicle delivery order that the vehicle is ready for pickup.
3.7.5 WORKMANSHIP
Federal Standard 122AX
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business