m. Visibility Switch Panel - including four position slide switch and 4 rocker switches.
Controls strobes, flashing LED lights, and alternating headlight flasher. Capable of
controlling up to 8-light bar or other lighting functions. Installed with bracket to console
mounting platform.
n. Lighting Relay Center - for use with the Visibility Switch Panel. Fused at 150 amps
through eight relays. Eight fuses. Eight outputs accessible at trunk for connection of
customer supplied lighting.
3.2.1.2.2 ENHANCED POLICE EQUIPMENT PACKAGE
When code PEP1 is specified, the vehicle OEM option package containing the following items
shall be provided:
a. All components specified for code PEP Police Equipment Package. Some
circuits are utilized to power the following equipment.
b. Wiring Harness - 30 Amp Ignition Circuit - supplies Remote Siren Amplifier.
c. RJ11 Serial Cable - pre-run from console to trunk for connection between Lighting and
Siren Controller and Remote Siren Amplifier.
d. Remote Siren Amplifier - utilizes vehicle horn circuit for activating siren and changing
tones. Radio rebroadcast inputs available in trunk. 50 watt siren output available in trunk
for addition of second speaker. Common mic input available in trunk. Meets California
Code of Regulations (CCR) Title 13, Article 5. Installed with bracket to Rear Trunk
Communications Service Tray.
e. Two (2) Grille Strobe Lights - installed with mounting brackets. Red and blue color
configuration is standard.
f. 100 Watt Siren Speaker - with replaceable driver. Installed with mounting bracket. Sound
output meets SAE J1849 and "Class A" 500 ft. audibility.
3.2.1.2.3 BASE POLICE EQUIPMENT PACKAGE
When code PEP2 is specified, the vehicle OEM option package containing the following items
shall be provided:
a. Two Front Strobe Bulbs and Two Rear Strobe Bulbs - installed in marker light and taillight
lenses.
b. Wiring Harness including the following items:
· Six Strobe Cables - shielded and grounded, pre-run to the front marker lights,
taillight lenses and two to the front grille. Strobe cables with industry standard
gender and color configuration for connection to customer supplied strobe power
supplies.
· Glove Box Power Distribution Center - 50 amps, fused in the engine compartment.
Five power and ground wires for customer use. Five fuses - two battery and three
ignition powered.
· Trunk Power Distribution Center - 50 amps, fused in the engine compartment. Four
power and ground wires for customer use. Four fuses - two battery and two ignition
powered.
· 50 Amp Battery Circuit and Ground - accessible at console base only.
· 50 amp Battery Circuit and Ground - accessible at console base or trunk. Available
in trunk from pigtail harness.
· Two 50 Amp Battery Circuits and Grounds - accessible at trunk only. Available in
trunk from pigtail harness.
· 50 Amp Battery Circuit and Battery Ground - accessible at console base or trunk, for
radio communications.
· 30 Amp Ignition Circuit - accessible in trunk only from pigtail harness.
· Siren/Speaker Wiring - pre-run to front of vehicle with waterpack connector.
Available in trunk from pigtail harness.
· Two Extra Circuits - pre-run to front of vehicle accessible at console or trunk.
· Horn/Siren Relay Circuit - accessible at console base or trunk.
Federal Standard 122AX
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business