a. The system has been designed and tested to withstand a 75 mph, 50% offset rear
impact by a mid-sized vehicle. In some crashes, including very high-energy crashes, the
fire suppression system could be so damaged by the crash forces that it cannot deploy.
Like any vehicle component, the system cannot withstand any and all crashes.
b. No vehicle can completely eliminate the risk of fires.
c. The vehicle should not be considered "fire proof" because it is equipped with a fire
suppression system.
3.2.1.2 POLICE USE VEHICLE OPTION PACKAGES
3.2.1.2.1 POLICE EQUIPMENT PACKAGE
When code PEP is specified, the vehicle OEM option package containing the following items shall
be provided:
a. Two Front Strobe Bulbs and Two Rear Strobe Bulbs - installed in marker light and taillight
lenses.
b. Wiring Harness including the following items:
· Six Strobe Cables - shielded and grounded, pre-run to the front marker lights,
taillight lenses and two to the front grille. Strobe cables with industry standard
gender and color configuration.
· Glove Box Power Distribution Center - 50 amps, fused in the engine compartment.
Five power and ground wires for customer use. Five fuses - two battery and three
ignition powered.
· Trunk Power Distribution Center - 50 amps, fused in the engine compartment. Four
power and ground wires for customer use. Four fuses - two battery and two ignition
powered.
· 50 amp Battery Circuit and Ground - accessible at console base only.
· Three 50 Amp Battery Circuits and Grounds - supplies Lighting Relay Center.
· 50 amp Battery Circuit and Battery Ground - accessible at console base or trunk, for
radio communications.
· Siren/Speaker Wiring - pre-run to front of vehicle with waterpack connector.
Available in trunk from pigtail harness.
· Two Extra Circuits - pre-run to front of vehicle, accessible at console or trunk.
· Horn/Siren Relay Circuit - accessible at console base or trunk.
· Four Extra Circuits - pre-run from the engine compartment to console base. One
circuit is heavy gauge for additional battery or ground connection.
· Four Extra Circuits - pre-run from the console base to trunk.
c. Alternating Headlight Flasher. Extra relay available for optional override of alternating
headlight flasher at night when headlights are in use.
d. Console Mounting Platform - secured using existing safety mounting points. The powder-
coated aluminum mounting plate is pre-drilled for the addition of equipment (without arm
rest).
e. Center Wiring Conduit - 2" x 4" opening. For ease of installation, the conduit will house
and protect any additional wire run from the center console to the trunk. Accommodates
most communication wires and connectors.
f. Hidden Manual Door Lock Plunger - located in both rear doors, forward door frame.
g. Trunk Air Circulation Fan - pulls air from passenger area and exhausts through trunk,
stabilizing climate for equipment. Grounded to reduce electromagnetic interference.
h. Tie Down Strap - for securing trunk when carrying large items like a bicycle.
i. Dual Trunk Storage Boxes - maximizes trunk space, provides equipment mounts, and
relocates jack. Clear view covers for quick reference.
j. Rear Trunk Communications Service Tray - glides on heavy-duty tracks. Shipped with
secured spare tire. For equipment mounting.
k. Strobe Power Supply - six outlets with front shutdown.
l. Two High Intensity Flashing Rear Deck LED Lights - red and blue color configuration is
standard.
Federal Standard 122AX
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business