MIL-T-12407X(AT)
(b) The chassis manufacturer's front axle before conversion has the same load rating as the conversion axle to be installed.
(c) Components used in the all wheel drive conversion are of current production.
(d) Components used in the all wheel drive conversion are approved for the conversion application by the component manufacturers.
(e) The converted vehicle is certified to conform to Federal Motor Vehicle Safety
Standard, No. 121, by the intermediate or final manufacturer.
(f) Replacement headlights, if required to be added to meet the height requirements of Federal Motor Vehicle Safety Standard No. 108, are equivalent in mounting, protection, and range and precision of adjustment to the chassis manufacturer's original standard headlights.
(g) Unused headlight cavities are covered in a neat workmanlike manner, treated and painted to match the chassis cab color with treatment and painting equivalent to the chassis cab manufacturer's process for the remainder of the chassis cab. Cavities and their covers shall be rustproofed in accordance with 3.1.1.4.
(h) Complete installation drawings are available to the procuring activity.
3.2 General design.
3.2.1 Federal Motor Vehicle Safety Standards. The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture.
3.2.2 Air pollution control. Vehicles destined for the 50 states, the District of Columbia, Puerto Rico, and all U.S. Territories except the Canal Zone, shall comply with the EPA regulations governing Control of Air Pollution from New Motor Vehicles and New Motor Vehicle Engines in affect on the date of manufacture. In addition, vehicles destined for California shall comply with the State of California regulations governing air pollution control in effect on the date of manufacture. For other vehicles, the manufacturer's export vehicle emissions package shall be furnished. The export package shall be designed for continuous vehicle operation on regular grade leaded gasoline without vehicle modification or adjustment.
* 3.2.3 Sound level. The interior sound level shall not exceed 84 db(A).
3.2.4 Curb weight. The curb weight shall include the weight of the chassis, integral cab and body, with all attachments, accessories, equipment, and a full complement of fuel, lubricants and coolant.
3.2.5 Gross vehicle weight. The minimum gross vehicle weight (GVW) shall consist of the curb weight, operator and assistant operator weights (175 pounds each), and a minimum payload of 1,400 pounds evenly distributed over the load area.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business