KKK-B-1579B
flat. The jack, without blocking, shall be capable of raising any wheel of loaded vehicle to a
height adequate to permit removal and replacement of wheel and tire assembly.
*
3.4.16 Controls and operating mechanisms. All controls and operating mechanisms shall
be located for left hand drive. Controls shall be complete and conveniently operable by the
driver in a seated position. Lever controls shall be designed and located to permit easy entrance
and exit of the operator to and from driver's seat. Instruments and controls shall be identified as
to their function and installed in a manner to facilitate removal and servicing. All instruments
shall be visible to driver when seated in driving position.
*
3.4.17 Instruments and equipment. Chassis equipment shall be complete with all
accessories/equipment furnished as standard equipment by the manufacturer. Instruments and
lamp bulbs shall be easily accessible for maintenance, replacement and repair and shall be
mounted on instrument panel in such a manner that each is clearly visible to driver in seated
position. The instrument panel shall have lamps of sufficient candle power to illuminate all
instruments and gages but so designed as to avoid undue glare. Unless otherwise specified
(see 3.4.17.1), the following minimum equipment shall be furnished:
(a)
Key-operated ignition switch.
(b)
Ammeter, charging indicator voltmeter.
(c)
Fuel gage.
(d)
Oil pressure gage or indicator.
(e)
Engine temperature gage or indicator.
(f)
Speedometer.
(g)
Recording odometer.
(h)
Indicator light to show headlight highbeam operating.
(i)
Tachometer (diesel engine driven buses only).
*
3.4.17.1 Panel meters and gages. When specified (see 6.2), the manufacturer's standard
or optional meters or gages shall be furnished in lieu of indicators specified in 3.4.17 (b), (d) and
(e) above.
3.5 Body. The bus shall provide adequate seating for the number of adult or school-age
passengers specified (see 1.2). Body shall have sides of the full-skirted type, shall present a
generally symmetrical appearance, shall effectively exclude engine fumes and exhaust gases
from the bus interior, and shall provide safe and comfortable transportation for passengers and
driver.
3.5.1 Inside body dimensions. At seat level, body inside width shall be not less than
90 inches. Between the first and last vertical roof bow, through center of aisle, inside height
shall be not less than 76 inches.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business