KKK-B-1579B
(a) Air compressor, unloaded-head type, engine driven and engine lubricated, air or
water cooled, and having a capacity of not less than 7-1/4 cubic feet per minute
(cfm).
(b) Air storage reservoir(s) with not less than 2,000 cubic inches total capacity; each
tank equipped with drain, and with safety and check valves between compressor and
last reservoir tank.
(c) Foot control, suspended or treadle type.
(d) Air control valves.
(e) Air pressure gage, visible to the driver.
(f) Low air pressure warning, visible and audible.
(g) Service brake stop lamp switch.
(h) Alcohol aspirator with unbreakable transparent container.
(i) Automatic moisture ejector.
(j) When specified (see 6.2), in lieu of subparagraph (h), an air dryer shall be furnished.
The air dryer shall be of the after cooled or desiccant type.
(k) Automatic slack adjusters.
3.4.12 Steering. Manufacturer's standard power steering shall be furnished.
*
3.4.13 Windshield wipers and washers. The vehicle shall be equipped with dual
windshield wipers and windshield washers. Windshield wipers shall be multispeed type and
operated by either air or electric motor(s) and shall conform to Federal Motor Vehicle Safety
Standard No. 104.
3.4.14 Bumpers. Front and rear bumpers shall be provided. Rear bumper shall conform
to Federal Motor Carrier Safety Regulation 393.86 and shall be as specified in 3.5.11.6.
3.4.15 Tools. When specified (see 6.2), the vehicle shall be furnished with tools required
for exchanging mounted tire assembly with a spare assembly (see 3.4.10.7) and shall include at
least a hydraulic jack, jack handle, and wheel nut wrench. The jack shall be of such closed
height as to permit its location under axle, or other satisfactory lift point, at any wheel with tire
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business