KKK-A-1822 E
The partition and door, when provided between cab and patient compartment on Type II and
Type III vehicles, shall not interfere with or restrict the OEM's full range of front seat adjustment.
The cab and cab-body shall comply with Federal Motor Vehicle Safety Standards 101, 102,
103, 104, 105, 107, 108, 111, 113, 115, 120, 124, 205, 206, 207, 208, 209, 210, 211, 212,
219, 301, and 302. Types II and III vehicles, of the integral cab-body design, shall be equipped
with front doors and window openings equal to the Type I conventional truck cab and conform
to 3.9.2 thru 3.9.8. All ambulance Types shall be provided with a partition between the cab or
driver's compartment and the patient's compartment (see 3.10.2 and 3.10.15).
3.9.2
CAB-BODY PROVISIONS.
Cab-body section shall provide a right and left side, weatherproofed, forward hinged door
with opening side windows and, when available from the OEM: crank or push open vent
windows; door stops; external key operated door locks with two sets of keys; trim or
closed panels and headliner (washable vinyl upholstery, or flooring type materials); floor
covering (OEM's heat, noise and appearance trim packages); panel mounted instruments;
and seat(s). All exposed interior surfaces shall be painted. Hardware and other exterior
exposed metal trim shall be chrome plated, stainless steel, or anodized aluminum. When
specified by the purchaser (see 3.10.15.2 and 3.15.3-29), a console shall be furnished that
will contain a map book, clip board, radio control head(s) speaker(s), etc. The console
shall be furnished per purchaser's specifications. Additionally, the vehicle shall be furnished
with at least the following equipment:
a.
Dual sun visors (padded).
b.
Armrests, mounted on each side door.
c.
Compartment ventilation, other than windows.
d.
Key operated ignition/starter switch.
e.
Ammeter and voltmeter (see 3.7.6.2 and 3.7.6.3).
f.
Fuel gauge(s).
g.
Oil pressure gauge.
h.
Engine temperature gauge.
i.
Speedometer with odometer.
j.
Environmental controls (heater-defroster/air conditioner, etc.).
k.
Seatbelts and shoulder harness for driver and passenger, when available from
chassis manufacturer.
l.
Dual outside mirrors (3.9.5).
m.
Cab lighting and controls.
n.
Tinted windshield.
o.
Dual electric horn(s).
p.
Throttle control (see 3.7.6.1).
38
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business