A-A- 50766
Engine net horsepower used in performance prediction calculations shall be determined in accordance with SAE J816. and J1349. A fan clutch to reduce fan speed automatically, when not required for, engine cooling, shall be provided.
c. Automatic transmission. A continuous drive, automatic transmission shall be provided. The transmission shall include a hydraulic torque converter and not less than three forward and one reverse gears. Normal driving range select or position shall provide not less than three forward gear ratios without movement of the selector.
14. Needle type gauges. Gauges (lights in lieu of gauges not acceptable) as follows will be installed so as to be easily monitored by the driver:
a. Voltmeter.
b. Oil pressure gauge.
c. Water temperature gauge.
d. Fuel quantity gauge.
15. Wipers. Two speed electric windshield wipers and dual jet washers will be supplied by the chassis manufacturers.
16. Windshield Defroster. Defroster outlets with suitable connections and blower(s) shall be furnished to provide an adequate flow of air to both halves of the windshield. The windshield defrosting systems shall conform to SAE J381 and.SAE J382.
17. Turn signals. Turn signal lamps shall be installed conforming to SAE J588. Operating units shall conform to SAE J589, class A, and shall be mounted on the steering column. Vehicle shall be provided with double-faced front signal units or single-faced front signal units in conjunction with armored,: amber turn signals over the front wheel wells, and with single-faced rear signal units. Signal units shall be installed in accordance with SAE J588, except that turn signals shall not be mounted on the engine compartment hood. Operating units shall be provided with a visible and audible flash indicator. Turn signals shall be of the self-cancelling type.
18. A warranty for 12,000 miles, or one year minimum on chassis and one year body construction and add-on components shall be provided. Warranty period shall start the date the vehicle is placed into operation by the purchaser.
Certification.
The contractor shall certify-that the product offered meets the salient characteristics of this description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product offered for sale in the commercial marketplace. The government reserves the right to required proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business